Diesel generator Konner & Sohnen KS 9200HDES-1/3 ATSR Silent, 7.5kW, soundproof, Diesel Euro 5, single-phase/three-phase, 18HP

Description:
A soundproof diesel generator covering a wide range of applications.
It is the first generator in the Stager range to come with an alternator capable of producing the same three-phase and single-phase power and current.

Benefits:
If we have a three-phase generator and want to use a single-phase consumer, we will only benefit from a third of the power.
YDE13TA-TA3 depending on the consumers can switch from three-phase to single-phase and vice versa, benefiting from all the power of the generator.
The advantage of being able to be used for all categories of consumers (bi-phase and single-phase) up to 9 kW maximum power.
Another advantage is that it is soundproof and the noise level is low.
It can also be used both for domestic and industrial use for power outages, with the possibility of mounting an ATS.
The generator is provided with the latest generation control panel.
An important help for construction sites where we know there are both three-phase and single-phase consumers.
It is equipped with wheels for transport.
Optional:
ATS
CMM366A-4G GSM connection module


Technical data:
GENERATOR
Nominal frequency: 50 Hz
Number of phases: single-phase / three-phase
Power factor (cos Φ): 1.0 / 0.8 (lag)
Nominal voltage: 230 V / 400/230 V
Rated power: 8.5 kVA (8.5 kW) / 10.5 kVA (8.5 kW)
Maximum power: 9.0 kVA (9 kW) / 11.0 kVA (9 kW)
Nominal current: 36.9 A / 15.2 A
Fuel tank capacity: 25 l
Fuel consumption (100% load): 330 g/kW.h (3.5 L/h)
Fuel consumption (75% load): 297 g/kW.h (2.4 L/h)
Structure: ultra silent
Net weight: 320 kg
Dimensions (LxWxH): 1200 x 650 x 800 mm
Control panel: SmartGen HGM 4020
Guaranteed noise level (LwA): 94 dB(A)

MOTOR
Engine model: YD2V80
Engine type: Diesel engine, 2 cylinders in V, 4 strokes, liquid cooling
Nominal power: 12 kW
Max. power: 12.5 kW
Nominal speed: 3000 rpm
Bore x stroke: 80 x 79 mm
Cylinder capacity: 0.749 L
Compression ratio: 23:1
Oil bath capacity: 2.27 L
Oil type: SAE 10W-30 (PRO 10W-30)
Fuel Type: Diesel 0# (Summer) -10# (Winter) -35# (Ice)
Aspiration: natural
Regulator type: mechanical
Starting system: electric 12V
Battery capacity: 36 Ah

ALTERNATOR
Alternator model: KTDS-10
Alternator type: 2-pole AC alternator, synchronous, maximum power
Nominal power: 10 kW
Nominal speed: 3000 rpm
Nominal voltage: 230/400 V
Efficiency: 84%
Insulation class: F
Degree of protection: IP21

CONTROL PANEL
The SmartGen HGM4020 panel is used for automatic power generator control and monitoring. It can perform functions such as: automatic start/stop, data measurement, protection alarms, etc.
All parameters can be configured from the front panel or using the USB (or RS485) interface and a computer. It can be widely used in all kinds of automatic control systems due to its compact structure, simple connections and high reliability.

Control panel features:
LCD display that allows easy viewing of information, resolution 132 x 64 pixels;
RS485 communication port allows 3 "remote" functions via MODBUS protocol;
Control and protection function: generator automatic start/stop, load transfer (ATS control) and fault display and protection;
Parameter setting: Allows the user to change settings and store them on a memory card. The parameters will not be lost even when it is turned off. The parameters can be set not only from the front panel, but also adjusted through the USB interface (or RS485 interface) using a PC;
Multiple temperature, pressure and fuel level sensors can be used directly, parameters can be defined by the user;
Measurement and display of the following engine parameters: temperature, oil pressure, fuel level, rpm, battery voltage, rectifier voltage, number of operating hours, number of starts;
It can measure and display grid/generator voltage, current, frequency and power parameters.

Technical data control panel:
Supply voltage: 8 ~ 35 Vdc
Power consumption: < 3 W (standby mode: ≤ 2 W)
Operating temperature: (-25 ~ +70)ºC
Alternator frequency: 50 / 60 Hz
AC system: 1P2W / 2P3W / 3P3W / 3P4W
Alternator voltage input range
- 3P4W (3-phase 4 wires): 15Vac – 360Vac (ph-N)
- 3P3W (three-phase 3-wire): 30Vac – 620Vac (ph-ph)
- 1P2W (single phase 2 wires): 15Vac – 360Vac (ph-N)
- 2P3W (biphase 3 wires): 15Vac – 360Vac (ph-N)
RPM Sensor Voltage: 1.0V – 24.0V (RMS)
Speed sensor frequency: 10000 Hz (max.)
Output relay start: 5A 28Vdc at source output
Fuel output relay: 5A 28Vdc at source output
Programmable output relays: 4 (1A 28Vdc at source output)
Degree of protection: IP65
AMF: YES
kW/A detection and display: YES
Programmable interface: USB / RS485
CANBUS port: YES
Maintenance: YES
Logbook: YES
Emergency start function: YES
Product specifications

Product specifications
stationary portability
residential use
mono output current

Fuel: Diesel

Starting system: electric

Maximum generator power: 10 kVA

Voltage: 230 V, 400 V

Automation Included: No Circumstances. It is delivered without oil and diesel

Fuel: Diesel
Starting system: electric
Maximum generator power: 7.5 kw
Voltage: 230 V, 400/230 V
Automation included: No